AV-GAD AV-702 Especificações Página 1

EasyLoaderAlarm Panels End User Operation Manual Version 3.00 Edition I This product is subject to continuous enhancements and therefore specification

10Note: The instant arming is not recommended. This will allow the easy arming by someone who is not a regular user. Auto Arming Auto Arming provides

11When a valid user code is received, followed by # in your phone (# is the Enter key), the control panel acknowledges it by a special tune. Otherwise

12AV-701, AV-702 Keypads (LED type) AV-702 keypad contains identical keys and LED structure to AV-701. The Status LED is on when all the zones are clo

13The local date and time is stored in system memory. Adjust date and time after long power-failure.LED IndicatorsFour LEDs provide visual indication

14c ChimeConfirms Chime mode via ‘5’ keyc ClosingWhen events log is displayed Indicates Arming followed by user numberd Delay Delete Confirms Delay De

15Delete a User Code 1. Hold down key 8Program2. While four LEDs are blinking, enter code No. 1 (default 1234) 3. If code is valid, four LEDs will sto

16The sounder emits sounds in the following instances: OPERATION SOUNDER RESPONSE Pressing of any key Short confirmation beep Hold-down functions

17The AV-707 keys and Hold-Down functions are identical to the AV-701 functions, you can speed up the function by pressing ‘#’ key – the ENTER key. Th

18Setting New Code for the AV-706, 707 To enter User Programming mode ‘Hold Down’ the '8' (program) key.The three Rightmost LEDs start blink

19On the upper display line, a blinking cursor will appear, type the number (digits from 0 to 9), hold down * for '*' digit, hold down &apos

2Table of Contents Table of Contents... 1 Syst

20Trouble Conditions The system constantly monitors itself to ensure proper operation. When a trouble condition occurs, the system condition will be d

21 Hold-down key 5 enables and disables the function. Chime mode is confirmed by ‘c’ displayed on keypad. 0Shuntand#Î LOCAL BUZZER ON and OFF

22Testing Your System It is recommended to test your system weekly. Perform system tests in the off-peak hours, such as early morning or late evening.

23Troubleshooting PROBLEM INDICATION REMEDY System fails to Arm when code is entered at Keypad Keypad entries are confirmed by beeps, but system does

24PROBLEM INDICATION REMEDY Buzzer is activated for no apparent reasonDoor at delayed zone (entrance) is open or there has been detection of movement

3System Configuration Zone Index Zone Description Type Zone Description Type 19210311412513614715816Installation Data Installer CS Information Progr

4EasyLoadertmSeriesAlarm Control Panels End User Operating Manual(For version 2.18 and 3.00) Congratulations for purchasing this state-of-art computer

5Bypass (Shunt) a zone Allows manual removal of one or more protected zones from the system. Day and Tamper Zone A zone programmed as a Day or Tamper

6Follower Zone (also called conditioned Zone)Follower Zone reacts instantly upon detection without previous triggering of Delayed zone. Exit delay app

7SounderThe sounder (in Keypad) simplifies alarm recognition by producing different amounts and sounds’ patterns to identify various events. The sound

8Basic Operations Arming Your System Before arming your system, close all protected doors, windows, and do not move around areas protected by motion d

9Zone BypassingA ‘Bypassed’ zone will not cause an alarm. Zones may be bypassed to allow access to part of the protected area while other zones are ar